Protection (Online) 26.11.24.PER, Perth
| Description | Start | End |
|---|---|---|
| Day 1: Tuesday | 9:00 | 17:00 |
| Day 2: Wednesday | 9:00 | 17:00 |
This course provides a comprehensive introduction to the advanced protection specific tools of PowerFactory.
Before registering for this course, prospective attendees should have a fundamental understanding of PowerFactory, including the ability to perform basic calculations (e.g. load-flow) and navigation through the PowerFactory database.
Topics covered include:
CO-1-01 - DIgSILENT Introduction
- Worldwide Company Overview
- DIgSILENT Pacific Offices
- Products
- History
PF-3-05 - Protection Elements
- Protection modelling Background
- Location of Protection devices in PowerFactory
- Fuses
- CTs and modelling CT saturation in PowerFactory
- Motor protection characteristic
PF-3-06 - Time Over-current Protection Analysis
- Over-current relay modelling
- Over-current relay characteristics
- PowerFactory relay model structure
- Protection SLD colouring modes
- Effective use of the time-overcurrent curve
PF-3-07 - Analysis of directional over-current protection and using the time distance diagram
- Directional over-current relays
- Defining a path for protection analysis
- Voltage transformers
- Time distance diagrams for directional and impedance relay analysis
PF-3-08 - Impedance relay protection analysis in PowerFactory
- Impedance relay principles
- R-X diagrams
- Distance relay characteristics
- Earth fault compensation factor
- Distance protection analysis using paths and time distance diagrams
PF-3-09 - Relay communication schemes in PowerFactory
- Principles of relay communications
- Typical relay communication schemes
- Implementation of a POTT scheme in PowerFactory
PF-3-10 - Time domain protection analysis in PowerFactory
- Setting up the time domain simulation
- Defining the fault events
- Running a time domain simulation
- Visualising the simulation results
PF-3-23 - Adding custom fuse types
- Tracing curves using the curve trace plot
- Saving the curves' characteristics to TOC types
- Creating fuse types
PF-3-35 - Arc-Flash Hazard Analysis
- Arc-flash standards IEEE-1584 and NFPA 70E
- How to set up accessible locations and their parameters
- How to set up arc-flash hazard analysis options
- How to customise the single line diagram to display arc-flash results
- How to create an arc-flash report and label database
PF-3-45 - Using the short circuit trace
- About short circuit traces
- Defining fault events
- How to run a short circuit trace
PF-3-46 - Distance protection coordination assistant
- What is the distance protection coordination assistant (DPCA)
- Setting up the network model to use the DPCA
- Methods of the DPCA
- Using the DPCA
- Results from the DPCA
PF-4-01 - PowerFactory relay model development
- Understanding the relay model structure
- Basic relay building blocks
- Editing relay type elements
- Inverse time characteristics
Please note:
- Course fee is in AUD and includes GST.
- Credit Card payments will incur a 2% surcharge on the course fee. The total amount for credit card transactions will be AUD 2,020.
- Participation will only be confirmed once payment has been received by DIgSILENT.
- The course is delivered via Microsoft Teams and utilises Microsoft Azure Lab Services training environment.
- Course fee includes access to PowerFactory training environment in the Cloud delivered via Microsoft Azure Lab Services.
- Participation is contingent on being able to access our training environment, a connection test session will be scheduled prior to date of the seminar.
Full rate AUD 1,980 inclusive of GST
For new users, registering a new user account will not automatically register you for the training course. Please follow the steps below in order to register for the course:
- Create a new user account using the Create New User Account button below;
- Confirm your user account by clicking on the confirmation link received as part of the new user account creation; and lastly,
- Revisit this page to register for the course using the Register For The Training Course button below